STP Commands
spanning-tree tx-hold-count
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
439
33
no spanning-tree priority
Parameters
•
priority
—The bridge priority. (Range: 0 to 61440)
Default Configuration
The default priority is 32768.
Command Mode
Global Configuration mode
User Guidelines
The priority value must be a multiple of 4096. The switch with the lowest priority is
the root of the STP. When more than one switch has the lowest priority, the switch
with the lowest MAC address is selected as the root.
Example
switchxxxxxx(config)#
spanning-tree priority 12288
spanning-tree tx-hold-count
To set the Tx-Hold-Count used to limit the maximum transmission packet number
per second, use the spanning-tree tx-hold-count Global Configuration mode
command.
To revert to its default setting, use the
no
form of this command.
Syntax
spanning-tree tx-hold-count
value
no spanning-tree tx-hold-count
Parameters
•
value
—The Tx-Hold-Count number. (Range: 1 to 10)
Default Configuration
The default value is 6.
