QoS Commands
show class-map
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
402
28
show class-map
To show information for all class maps or for a specific class map when the switch
is in QoS advanced mode, use the show class-map Privileged EXEC mode
command.
Syntax
show class-map [
class-map-name
]
Parameters
•
class-map-name
—(Optional) The class map name.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx#
show class-map class1
Class Map match-any class1 (id4)
Match IP dscp 11 21
show policy-map
To show information for all policy maps or for a specific policy map, use the show
policy-map Privileged EXEC mode command.
NOTE
This command is available only when the switch is in QoS advanced mode.
Syntax
show policy-map [
policy-map-name
]
Parameters
•
policy-map-name
—(Optional) The policy map name.
Default Configuration
N/A
