User Interface Commands
exit (EXEC)
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
484
39
exit (EXEC)
To close an active terminal session by logging off the switch, use the exit
Privileged EXEC mode command.
Syntax
exit
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example closes an active terminal session:
switchxxxxxx#
exit
history
To enable the history buffer and set the maximum number of user commands that
are saved in the history buffer for a particular line, use the history Line
Configuration mode command.
To disable the history buffer and restore the history buffer size to its default
setting, use the no form of this command.
Syntax
history [size
number-of-commands
]
no history
