![background image](http://html.mh-extra.com/html/cisco/1700-series/1700-series_hardware-installation-manual_64777073.webp)
C-7
Cisco 1700 Router Hardware Installation Guide
78-5405-03
Appendix C Installing and Upgrading Router Memory
Figure C-5
Removing a Mini-Flash Module
Installing a DIMM
You can install a dual inline memory module (DIMM) to increase the amount of
dynamic random-access memory (DRAM) in the router.
Take the following steps to install a DIMM on the router motherboard.
Step 1
Locate the DIMM slot on the motherboard, shown in
Figure C-2
.
Step 2
Remove any existing DIMM by pulling the DIMM slot
guides (shown in
Figure C-6
) away from the DIMM and
down towards the motherboard.
Step 3
Hold the replacement DIMM with the notched edge
away from you and facing the router.
Step 4
Insert the DIMM into the DIMM slot, making sure that
the notches on the edge of the DIMM are inserted over
the bars inside the DIMM slot, as in
Figure C-6
.
12614
Mini-Flash module release lever