Cisco 1601 - Router - EN, User Manual

Page: 32 / 88

Connecting the Router to the WAN
Cisco 1600 Series Router Hardware Installation Guide 2-14
Figure 2-8 ISDN Wall Jack Connection—Cisco 1603
Warning
Network hazardous voltages are present in the BRI cable. If you detach
the BRI cable, detach the end away from the router first to avoid possible electric
shock. Network hazardous voltages also are present on the system card in the area
of the BRI port (RJ-45 connector), regardless of when power is turned off.
Step 3
Check the following LEDs:
•
The OK LED on the rear panel (next to ISDN S/T port) lights when the router
has synchronized with the central office switch.
•
The external NT1 might have an LED indicating synchronization with the
central office switch or other NT1 status. Check the NT1 documentation.
H3587
Wall jack
Straight-through
BRI cable