15
Setting a Static IP Address
To set a static IP, select the
Addresses
tab under the
IP
section in the toolbar. There is an IP address
entry that is disabled by default. Click on it.
If your network falls in one of the ranges below, you can set the static IP address yourself. If it is
outside of these ranges, you must call CIS to have a route created on the access point!
Available address ranges:
172.16.1.0/24
10.100.1.0/24
192.168.1.0/24
192.168.0.0/24
Check the
Enabled
box, then enter the IP address you would like to use. It MUST be in the range of your
network, and outside of the range of the DHCP pool. The format must include
/24
at the end. This is the
subnet mask, which determines how many devices can be connected to this network.
Summary of Contents for WAP XL
Page 1: ...CIS WAP XL User Manual...
