CIS VCC-12CL1M, Product Specification & Operational Manual

Page: 9 / 30

VCC-12CL1M Rev. 900-795-35-00
©2016 CIS Corporation. All rights reserved.
9
4: 1/150s 1/150s 1/150s
5: 1/200s 1/200s 1/200s
6: 1/250s 1/250s 1/250s
7: 1/500s 1/500s 1/500s
8: 1/1000s 1/1000s 1/1000s
9: 1/2000s 1/2000s 1/2000s
10: 1/5000s 1/5000s 1/5000s
11: 1/10000s 1/10000s 1/10000s
12: 1/15000s 1/15000s 1/15000s
13: 1/15000s 1/20000s 1/20000s
14: 1/15000s 1/30000s 1/30000s
15: 1/15000s 1/30000s 1/34000s
16: Manual Shutter (Refer to Address 9)
17: AE
Trigger Shutter Mode 4 0: Normal Shutter Mode (Trigger OFF)
1: Fixed Trigger Shutter Mode (Shutter speed can be set with address 2.)
2: Pulse Width Trigger Shutter Mode
(Shutter speed can be set with trigger pulse width.)
Manual Gain 5 0
～
511: 0:0dB
～
511:+12dB
Manual Shutter 9
2
～
3000:
2 Line/Step
Normal
Shutter Mode
Medium Configuration Mode:
Shutter Speed = 14.028us (1HD
）
x setting value
min.value 2: 28.1us, max.value 3000:42.1ms
Full , 8Tap10Bit Configuration Mode:
Shutter Speed = 7.222us (1HD
）
x setting value
min.value 2: 14.4us, max.value 3000:21.7ms
10Tap Configuration Mode:
Shutter Speed = 5.778us(1HD
）
x setting value
min.value 2: 11.6us, max.value 3000:17.3ms
The minimum value at Fixed Trigger Shutter Mode is set to 14, and the shutter
speed at that time comes to the fastest value of the address 2.
ex
：
Min. exposure time at 10Tap Configuration
：（
14 - 9
） ×
1H = 28.89us
※
Set the data of Address 2 to 16
Targeting AE Level 10
0
～
100
：
Targeting level at AGC and AE ON 0
～
100
％
Trigger Polarity 11 0: Positive
1: Negative
Trigger Input 12 0: Camera Link (CC1) Input
1: 12pin Connector(11pin) Input
Output Data Selection 13 0: 8bit Output
1: 10bit output (10bit cannot be output at 10Tap Full Configuration mode.)
2: 12bit output (12bit cannot be output at 8Tap/10Tap mode)
Reflection of partial scan
setting value 14 1
：
Check a setting error of each partial scan area and execute the partial
scan without error.
Partial Scan Mode 15 0: Full Frame Scan Mode
1: Partial Scan Mode