CIS VCC-12CL1M, Product Specification & Operational Manual

Page: 29 / 30

VCC-12CL1M Rev. 900-795-35-00
©2016 CIS Corporation. All rights reserved.
29
16.
Cases for Indemnity (Limited Warranty)
The term of warranty of this product is within 3 years after shipping out from our factory
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the
user in the following cases.

In case damage or losses are caused by fire, earthquake, or other acts of God, acts by third party,
deliberate or accidental misuse by the user, or use under extreme operating conditions.

In case indirect, additional, consequential damages (loss of business interests, suspension of business
activities) are incurred as result of malfunction or non-function of the equipment, we shall be
exempted from responsibility for such damages.

In case damage or losses are caused by failure to observe the information contained in the instructions
in this product specification & operation manual.

In case damage or losses are caused by use contrary to the instructions in this product specification &
operation manual.

In case damage or losses are caused by malfunction or other problems resulting from use of equipment
or software that is not specified.

In case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).

Expenses we bear on this product shall be limited to the individual price of the product.
17.
CMOS Pixel Defect
CIS compensates the noticeable CMOS pixel defects found at the shipping inspection prior to our shipment.
On very rare occasions, however, CMOS pixel defects might be noted with time of usage of the products.
Cause of the CMOS pixel defects is the characteristic phenomenon of CMOS itself and CIS is exempted from
taking any responsibilities for them. Should you have any questions on CMOS pixel defects compensation,
please contact us.
18.
Product Support
When defects or malfunction of our products occur, and if you would like us to investigate on the cause and
repair, please contact your distributors you purchased from to consult and coordinate.