3
*
4
1
1
#
2
Pick up 801(unlock)
Input * 31 1 2 4 #
Du
Hang up
Format:
* 3 1 a b c d e f g h #
a b c d e f g h = CO Line ports that will be connected;
Description: Assigns which external ( CO ) line is connected to which CO line port.
Example : The company has three external CO lines. To connect external CO line 1 to
CO line port number 1, CO line 2 to port 2 and CO line 3 to port 4.
4.4 EXTERNAL (CO) LINE CONNECTION ASSIGNMENT
4.5. EXTERNAL (CO) LINE RINGING SELECTION
Format:
mn = CO Line port number (01-08);
abcd = last digit of extension port
Description: The user can select which extension(s) must ring, when there is an incoming
call on an external CO line.
Example, Assign Ext. 802 to ring when external call on CO1, Ext. 803 and Ext.806 to ring
when external call on CO Line 3.
* 1 mn abcd #
* Normally the order to select the CO line ports is from port one to port two,
port three
one by one. For some situations, the user could ignore one
port and jump from port three to port four.
* For the CO lines, it is recommended to connect the incoming CO lines to
the high-frequently-used CO port lines and the outgoing CO lines to the
low position CO port lines.
* If no CO lines are connected and the unit is used as an intercom system
then input * 31 #.
1
*
1
#
0
2
*
0
3
#
1
3
6
Pick up 801(unlock)
Input * 1 01 2 #
Du
Input * 1 03 3 6 #
Du
Hang up
* The CO line port must be in operator mode
* The ringing extensions can only be assigned among extensions 801 to 808
-
-
09
