CR:112A & CR:112AIS doseBadge User Manual
Page 14
Do not over tighten the doseBadge onto the Charger. The doseBadge should be
screwed onto the charger until the indicator change status and then one more half turn.
During the charge cycle, the green indicator will flash to show that the charging is in
progress.
Once charging has finished, the green indicator stops flashing and remains on
continuously.
At this time the doseBadge is receiving a trickle charge to keep it topped up. To ensure
optimum operation, the doseBadge may be left on trickle charge when not in use.
Summary of Charger Indicators
No Indicator
doseBadge Not Connected
Green LED Flashing
doseBadge Charging
Green LED On
doseBadge Charged
The CU:110A doseBadge Charger will display errors during charging if, for example, the
doseBadge battery does not charge as expected. In this case, the Green LED will flash
quickly to indicate the charging error.
Removing the power from the CU:110A Charger
If the power is removed from the CU:110A Charger Unit and then reconnected, the
charging cycle will restart.
However, if the batteries in the doseBadges still contain charge when this occurs, the
charging time will be shorter than the maximum 2½ hours charge time.
