Cirrus Logic ARM CDB89712, User Manual

Page: 14 / 46

CDB89712
2-4 DS502UM2
2.4 ENSURING THAT YOU HAVE THE LATEST REVISION OF THIS DOCUMENT
This document describes the hardware and software components of the CDB89712-DK product.
Any changes to the Development Kit will be described in future revisions of this manual and in
Errata Sheets, if any, that accompany this document. The latest version of this manual, as well as
documentation associated with all the other products from Cirrus Logic can be found on the Cirrus
Internet site at:
http://www.cirrus.com/
2.5 SOURCES OF ADDITIONAL INFORMATION
l
Internet addresses for suppliers of parts used in the CDB89712 Development Kit:
l
3M http://www.mmm.com/interconnects
l
ARM: http://www.arm.com
l
AMP: http://connect.amp.com
l
Bourns: http://www.bourns.com
l
Coilcraft: http://www.coicraft.com
l
Halo Electronics: http://www.haloelectronics.com
l
Intel: http://www.intel.com/developer
l
Kemet: http://www.kemet.com
l
LynuxWorks: http://www.lynuxworks.com
l
Maxim: http://www.maxim-ic.com
l
Micrel: http://www.micrel.com
l
Microchip: http://www.microchip.com
l
NEC: http://www.necel.com
l
Sipex: http://sipex.com
l
Vishay: http://www.vishay.com
2.5.1 Style Conventions
This manual follows these style conventions:
l
The first number in the section number that precedes each heading equals the number of the chapter in
which the heading appears. For example, the heading, “2.5 Sources of Additional Information” is
found in Chapter 2.
l
Table and figure numbers begin with the chapter number; for example, Figure 2-1 and Table 2-2 would
be in chapter 2.