manualshive.com logo in svg

CIRRUS DESIGN 2220, Pilot Operating Handbook

The Nokia 2220 User Manual is an essential guide for getting the most out of your device. This comprehensive manual covers all features and functions, ensuring smooth operation. Download the free manual from our website to unlock the full potential of your Nokia 2220 effortlessly.

Share
Download
background image

F

RONTMATTER

C

IRRUS

 D

ESIGN

F

OREWORD

SR20

Frontmatter-2

P/N 11934-005

The data presented in this POH is the result of extensive flight tests and is 
approved by the Federal Aviation Administration. However, as new proce-
dures or performance data are developed, the POH will be revised.

• N

OTE

 •

It is the responsibility of the owner to ensure that the Pilot’s Oper-

ating Handbook is current at all times. Therefore, it is very 

important that all revisions be properly incorporated into this 

POH as soon as they become available.

Revising the Pilot’s Operating Handbook

Two types of revisions may be issued for this Handbook: Temporary and 
Numbered. 
Temporary revisions are printed on yellow paper, normally cover only one 
topic or procedure, and are issued to provide safety related information in 
a timely manner. All the information needed to properly file a temporary 
revision is included on the revision itself. Typically, a temporary revision is 
superseded and replaced by the next numbered revision.
Numbered revisions are printed on white paper, normally cover several 
subjects, and are issued as general updates to the POH. Each numbered 
revision includes an “Instruction Sheet”, a “List of Effective Pages”, and a 
“Revision Highlights” page. The “Instruction Sheet” is intended to assist 
the manual holder in removing superseded pages and inserting new or 
superseding pages. The “List of Effective Pages” shows the issue or revision 
status of all pages in the POH. The “Revision Highlights” page gives a brief 
description of changes made to each page in the current revision.

Identifying Revised Material

Each page in the POH has revision identification at the lower inside corner 
opposite the page number. Original issue pages will be identified by the 
words “Original Issue” at this location. In the event that the majority of 
pages in the POH are revised, Cirrus may determine that it is more effective 
to reissue the POH. Reissued pages will be identified by the word “Reissue” 
followed by a letter indicating the reissue level; for example, “Reissue A”. 
Revised pages will be identified by the word “Revision” followed by the 
revision number at this location; for example, “Revision 2” (Original Issue, 
Revision 2) or “Revision B1” (Reissue B, Revision 1).
Revised material on a page can be identified by a change bar located at the 
outside page margin. Revision bars are not used at reissues of the POH.

Revisions to the Pilot’s Operating Handbook

POH revisions, temporary revisions, and supplements can be downloaded 
from Cirrus at 

www.cirrusaircraft.com

,

 

or from the Authorized Service 

Center website.
Paper copies of POH revisions and supplements can be purchased from 
Cirrus Connection at

 www.cirrusconnection.com

.

Reissue A

Summary of Contents for 2220















































































































































































































































































































































Reviews:

No comments

Related manuals for 2220

SOL paragliders TR27 Manual preview
TR27
Brand: SOL paragliders Pages: 26
U-Turn EMOTION 2 Manual preview
EMOTION 2
Brand: U-Turn Pages: 28
P.AP. Team THOR130 Use And Maintenance Manual preview
THOR130
Brand: P.AP. Team Pages: 12
MAC PARA Magus User Manual preview
Magus
Brand: MAC PARA Pages: 36
Diamond JAR-VLA Flight Manual preview
JAR-VLA
Brand: Diamond Pages: 136
Van's Aircraft RV 12iS Production Acceptance Procedures preview
RV 12iS
Brand: Van's Aircraft Pages: 50
Parajet VOLUTION 3 Manual preview
VOLUTION 3
Brand: Parajet Pages: 8
Cessna T303 Maintenance Manual preview
T303
Brand: Cessna Pages: 28
Cessna TR182 1979 Pilot Operating Handbook preview
TR182 1979
Brand: Cessna Pages: 328
Mitsubishi Ki-15 Babs Construction Manual preview
Ki-15 Babs
Brand: Mitsubishi Pages: 85
Reely 2373336 Manual preview
2373336
Brand: Reely Pages: 56
Piper Aircraft Corporation ARCHER II PA-28-181 Operating Handbook preview
ARCHER II PA-28-181
Brand: Piper Aircraft Corporation Pages: 117
Niviuk IKUMA P User Manual preview
IKUMA P
Brand: Niviuk Pages: 24
Niviuk ICEPEAK 7 PRO-MODEL User Manual preview
ICEPEAK 7 PRO-MODEL
Brand: Niviuk Pages: 21
Niviuk HOOK 4 P Series User Manual preview
HOOK 4 P Series
Brand: Niviuk Pages: 24
Niviuk Hook 4 User Manual preview
Hook 4
Brand: Niviuk Pages: 24
Niviuk Hook 5 User Manual preview
Hook 5
Brand: Niviuk Pages: 27
Niviuk DOBERMANN User Manual preview
DOBERMANN
Brand: Niviuk Pages: 24

Brands by name

Popular brands

Load more brands