manualshive.com logo in svg

CIRRUS DESIGN 2220, Pilot Operating Handbook

The Nokia 2220 User Manual is an essential guide for getting the most out of your device. This comprehensive manual covers all features and functions, ensuring smooth operation. Download the free manual from our website to unlock the full potential of your Nokia 2220 effortlessly.

Share
Download
background image

C

IRRUS

 D

ESIGN

F

RONTMATTER

SR20

F

OREWORD

P/N 11934-005

Frontmatter-1

Foreword

This Pilot’s Operating Handbook (POH) has been prepared by Cirrus to 
familiarize operators with the aircraft. Read this POH carefully. It provides 
operational procedures that will ensure the operator obtains the perfor-
mance published in the manual, data designed to allow the most efficient 
and safe use of the airplane, and basic information to assist in maintaining 
the airplane in airworthy condition. 

• N

OTE

 •

All limitations, procedures, maintenance & servicing require-

ments, and performance data contained in this POH are manda-
tory for compliance with FAA operating rules and for continued 

airworthiness of the airplane.

This POH includes the material required to be furnished to the pilot by the 
Code of Federal Regulations (CFRs) and additional information provided 
by Cirrus and constitutes the FAA Approved Airplane Flight Manual for 
the aircraft.

The Pilot’s Operating Handbook

This POH has been prepared using GAMA Specification #1 for Pilot’s 
Operating Handbook, Revision 2, dated 18 October 1996 as the content 
model and format guide. However, some deviations from this specification 
were made for clarity. The POH is presented in loose-leaf form for ease in 
inserting revisions and is sized for convenient storage. Tabbed dividers 
throughout the POH allow quick reference to each section. Logical and 
convenient Tables of Contents are located at the beginning of each section 
to aid in locating specific data within that section. The POH is divided into 
ten sections as follows:

Section 1 ........................................................................................ General
Section 2 ..................................................................................Limitations
Section 3 ..............................................................Emergency Procedures
Section 3A ............................................................ Abnormal Procedures
Section 4 ....................................................................Normal Procedures
Section 5 ...................................................................... Performance Data
Section 6 ...................................................................Weight and Balance
Section 7 .................................................................. Systems Description
Section 8 .............................................................Handling and Servicing
Section 9 ................................................................... Log of Supplements
Section 10 ................................................................... Safety Information

Reissue A

Summary of Contents for 2220















































































































































































































































































































































Reviews:

No comments

Related manuals for 2220

Independence paragliding Trigon Owner'S Manual preview
Trigon
Brand: Independence paragliding Pages: 16
Cessna 17273274 Pilot Operating Handbook preview
17273274
Brand: Cessna Pages: 189
SOL paragliders Hercules 2 240 Manual preview
Hercules 2 240
Brand: SOL paragliders Pages: 29
Diamond DA 40 Flight Manual preview
DA 40
Brand: Diamond Pages: 300
ICARO SQUARE Light 90 Manual preview
SQUARE Light 90
Brand: ICARO Pages: 14
Ozone LiteSpeed 15 Pilot'S Manual preview
LiteSpeed 15
Brand: Ozone Pages: 18
Avid Technology SPEEDWING MKIV Flight Manual preview
SPEEDWING MKIV
Brand: Avid Technology Pages: 15
UP Thango XC3 Owner Manual And Service Booklet preview
Thango XC3
Brand: UP Pages: 52
Mitsubishi Ki-15 Babs Construction Manual preview
Ki-15 Babs
Brand: Mitsubishi Pages: 85
FireBird Z-ONE Handbook preview
Z-ONE
Brand: FireBird Pages: 84
Fokker WEEKEND 7438 Quick Start Manual preview
WEEKEND 7438
Brand: Fokker Pages: 8

Brands by name

Popular brands

Load more brands