Circutor RAPTION 150C CCS CHA, Instruction Manual

Page: 52 / 120

Raption 150C
Instruction Manual 52
Go to
Status
→
Network
→
LAN
→ DHCP Leases and pay attention to IP addresses
At
‘DHCP Leases’
check that the modem has detected the automatic IP address and MAC
number for both, your Service PC and the Charge Point.
NOTES:
1.-
If the modem has not detected the automatic IP address, switch off the circuit breaker,
wait for 10 seconds and switch on again. Connect again your Service PC to the access point
named
ChargePoint_xxxxxxxxxxxx
, and repeat the steps
4.3.
y
4.6
.
2.-
To make sure that the Charge Point’ s MAC number is correct, it can be seen in one label
behind the HMI screen.