Circutor line-EDS-PS, Instruction Manual

Page: 21 / 30


Primary DNS server:
Address of the primary DNS server.

Secondary DNS server: Address of the secondary DNS server.
6�2- TIME SETUP
In this section, the line-EDS-PSxxx time parameters are configured.
Figure 18: Configuration website: Time setup�

Primary NTP server: Watch synchronisation protocol address, Network Time Provider.

Secondary NTP server: Network Time Provider’s secondary address, in case NTP 1 fails.

Time zone:
Time zone where the device is located.
Press to synchronise the time on the device with the computer.
6�3- ACTIVE MODE
In this section, the parameters of the
AMB
(Active Mode Bridge) system are configured. The
AMB
system inverts the role of the process for connecting remote devices. The devices are the ones that
initiate the communication process with the connection server located on a central computer, creating
a transparent communication tunnel between the device and server. This avoids the requirement of
having a fixed IP or DynDNS system at the user’s remote control sites.
Figure 19: Configuration website: Active mode�

Active mode:
Turns the
AMB
service on or off. If this option is on, the following parameters need to
be configured:

Host:
Destination IP address to which the device connects actively.

Port: Access port to the server where the AMB connecting software has been installed.

Identifier:
Each device connected to the
AMB
system must have an identifier or alias to enable
the connection to the server.
21
Instruction Manual
line-EDS-PSxxx