Circutor DHC-96 Adc, Instruction Manual

Page: 14 / 50

4�3�- RELAY OUTPUTS
The device features two programmable relay outputs (terminals 28, 29, 31 and 32, as shown in
Figure 6
)
that can be programmed as remote control signals or alarms in the setup menu (
“5.4.- RELAY OUTPUT
1” and “5.5.- RELAY OUTPUT 2”
).
1 2
70 59 71
1 2
72 58 28 29 31 32 16 15
+ -
B A
RS-485
C
1 2
1 2
I
S1 S2
P1 P2
4 5
Alimentación Auxiliar
Power Supply
Salida de relés
Digital inputs
Relay output
Analog output
Entradas Digitales
Salida Analógica
Figure 6: Relay outputs, digital inputs and Analog output�
4�4�- ANALOG OUTPUT
The device has an analog output (terminals15 and 16 of
Figure 6
) programmable through the configu-
ration menu (
“5.3.- ANALOG OUTPUT”
)
4�5�- ENTRADAS DIGITALES
The device has two digital inputs (terminals 70, 71 and 72 of
Figure 6
). The relay outputs can be activat-
ed depending on the value of the digital inputs (See
“5.4.- RELAY OUTPUT 1” and “5.5.- RELAY OUTPUT 2”
4�6�- DISPLAY
The DHC-96 Adc features 3 display screens,
Table 7
.
Table 7: Display menu�
Display menu
5.000
Current
14
DHC-96 mAdc, DHC-96 Adc
Instruction Manual