Circutor DHB-402, Instruction Manual

Page: 35 / 60

To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 44
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41
).
Range : -19999 ... 99999.
Default value
: 0.0000
4�7�8�4� ANALOGUE OUTPUT: FULL-SCALE VALUE
(
DHB-424
model)
This screen is used to configure the display value you wish to have at the end of the analogue output
(
10 V
or
20 mA
, depending on the type of output selected).
The screen flashes between the symbol and the configured value (
Figure 45
).
Figure 45:Analogue output configuration screen: full-scale value�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 45
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41
).
Range:
-19999 ... 99999.
Default value: 99999
35
Instruction Manual
DHB-402 DHB-424