Circutor DHB-302, Instruction Manual

Page: 43 / 70

4�6�8�4� DISpLAyINg THe UNIT Of MeASUReMeNT
This screen is used to select the parameter to be shown on the display in order to display the
corresponding unit of measurement. (The selected parameter must be the same as in section
4.6.1.1. PARAMETER TO DISPLAY
)
The screen flashes between the symbol and the configured value. (
figure 52
)
figure 52: Unit of measurement display configuration screen.
To edit the parameter, press the button.
The parameters that can be displayed are:
RMS voltage RMS current
Active power Reactive power
Apparent power
Power factor
(cos φ)
tg φ φ
Frequency
Active energy
Generated
Active energy
Consumed
Reactive energy
Generated
Reactive energy
Consumed
Maximum demand for
active power
Average voltage
(10 minutes)
Average frequency
(10 seconds)
43
Instruction Manual
DHB-302 DHB-324