Circutor CVM-D41 DC, Instruction Manual

Page: 52 / 60

52
CVM-D41 DC
Instruction Manual
Analog output
Quantity
1
Maximum internal voltage 17 V
Linearity 0,5%
Nominal output range
(10)
Current output model:
0-20 mA, 4-20 mA, 4-12-20 mA (programmable)
Voltage output model:
0-10 V, 2-10 V (programmable)
Maximum load resistor 350 Ω
(10)
Depending on model, see
Table 7
.
RS-485 communications
Communications protocol
Modbus RTU
Baud rate 2400 - 4800 - 9600 - 19200 bps
Data bits 8
Stop bits
1 - 2
Parity without, even, odd
User interface
Display LED 5 digits
Keyboard 4 keys
LEDs
2 LED
Environmental features
Operating temperature -25ºC ... +55ºC
Storage temperature -25ºC ... +70 ºC
Relative humidity (no condensation)
≤ 93%
Maximum altitude 2000 m
Protection degree IP Front: IP54, Rear case: IP20
Protection degree IK
IK08
Pollution degree 2
Use Indoor
Isolation
Power supply - Output : ≥ 2kV ~
Input - Output : ≥ 1kV ~
Mechanical features
Terminals
1, 2, 4, 5, 11, 15, 16, 28, 29, 31, 32, 58, 59, 70, 71, 72 ≤ 2.5 mm
2
0.5 ... 0.6 Nm PZ0
Dimensions Figure 26 (mm)
Weight 284 g.
Surround
pc + abs
Standards
Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test�
IEC 61000-4-2
Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques - Ra-
diated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-3
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques -
Electrical fast transient/burst immunity test
IEC 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Sur-
ge immunity test
IEC 61000-4-5