Circutor CVM-D41 DC, Instruction Manual

Page: 16 / 60

16
CVM-D41 DC
Instruction Manual
Table 6 (Continuation): Keyboard functions�
Key Keystroke
Long keystroke (> 3s):
Enter in configuration menu
In the configuration menu:
Jump to the next level / Confirm an operation
4�3�- LEDs
The device has 2 LEDs, AL1 and AL2 (
Figure 9
) that are activated when Alarm 1 ( AL1 ) is activated and
Alarm 2 (
AL2
). The alarms on the device are configured in the settings menu:
“5.4 - RELAY OUTPUT 1”
and
“5.5 - RELAY OUTPUT 2”
.
4�4�- RELAY OUTPUTS
The device features two programmable relay outputs (terminals 28, 29, 31 and 32, as shown in
Figure
10
) that can be programmed as remote control signals or alarms in the setup menu (
“5.4.- RELAY OUT-
PUT 1”
and
“5.5.- RELAY OUTPUT 2”
).
1 2
U+
59 58 28 29 31 32 16 15
- +
B A
RS-485
DIC 1 2
RO1
R02
+
-
Digital inputs
Entradas Digitales
Analog output
Salida Analógica
Alimentación Auxiliar
Power Supply
Relay output
Salida de relés
Load
Carga
I
Shunt
-
+
4
5
11
70 71 72
IU
L
N
A0
Figure 10: Relay outputs, digital inputs and Analog output�