Circutor CIRWATT B 400, Instruction Manual

Page: 34 / 52

34
CIRWATT B 400
Instruction Manual
Table 10 (Continued): Menu screens�
Screens Description Observations
L44
U Inst
INSTANTANEOUS
VALUES
It shows information on the instantaneous values of various
electrical parameters
L45
Co
COMMUNICATIONS
It shows information on the various parameters of the
communications ports
L46
Ident IDENTIFIERS
It shows information on the different identifiers of the device,
including those pertaining to the IEC870-5-102 protocol
L47
SaLIda OUTPUT CONSTANTS It shows information on the pulse values of the outputs
L48
C Hor
TIME CHANGE It shows information on the dates of the time changes.
Atras
BACK Return to previous screen
L40 Screen (INFORMATION: INDICATORS)
This screen shows information on the operating indicators. They are used to verify the proper operation
of every essential aspect of the device during the installation or in subsequent on-site checks. It is a
DATA screen.
Table 11:Operating indicator screens�
Screen OBIS Description
L40 Indic
0
.
13
.
38
e.g. 1
ACTIVE QUADRANT : It indicates the direction of the active and reactive
energy or quadrant (1,2,3 or 4)
0
.
12
.
38
e.g. 123
PRESENCE OF VOLTAGE : It indicates the presence of voltage in each phase
(123 if there is voltage in all of them, blank if no voltage)
0
.
11
.
38
e.g. 120
CURRENT DIRECTION
: It indicates the import (+) or export (-) direction in
each phase (111 if imported, 222 if exported, 000 if none)
0
.
18
.
12
e.g. 633
ACTIVE TARIFF FOR EACH CONTRACT
: It indicates the active tariff for each
contract (contract 1, contract 2, contract 3) (values from 1 to 6 for each
contract) when the reading is taken
0
.
6
.
2
.
4
e.g. 0
PARAMETERISATION MODE : It indicates if the parameterisation mode is
enabled (0 disabled, 1 enabled)
0
.
6
.
5
.
0
e.g.
Cn
ALARMS : It indicates the alarms defined in section 1.7. The data field will
show the letters
CNB
, which will be activated depending on the nature of the
alarm.
L41 Screen (INFORMATION: CONTRACT PARAMETERS)
This screen shows the information on the contracted powers for contract 1. It only applies to power
excesses in Contract 1. It is a DATA screen.
Table 12:Contracted Powers screens�
Screen OBIS Description
L41 
.
Cont
1
.
135
.
1
CONTRACTED POWERS
: Corresponds to the values in kW, with 2 decimal
places, for the contracted powers that will be used to calculate excesses
1.135.x where x = tariff (period)
1
.
135
.
2
1
.
135
.
3
1
.
135
.
4