Circutor AFQm IP54, Instruction Manual

Page: 144 / 174

144
AFQm IP54
Instruction Manual
ENGLISH
7.5.- HARMONICS SELECTION
Note: This screen is not visible on the “slave” devices.
Note: The screen that appears if you have selected the operating mode FREQ: Frequency mode
(“7.4.-
WORKING MODE”)
The harmonics to be filtered are selected in this screen,
Figure 59
.
Figure 59: Configuration screen: Harmonic selection.
Press the key to save the modified settings.
7.6.- OPERATING LIMITS
Note:
This screen is not visible on the
“slave”
devices.
In this screen,
Figure 60
, the operating limits of the device are configured:
Figure 60: Configuration screen: Operating limits.
●
Min current
The minimum load current to start the active filter is configured with this parameter. Minimum current
feature is used to increase the system efficiency, by stopping the filter when required. The AFQm IP54
will stop when the load current is below the entered value and will start when it is higher.