OG_MU-4-434_v10e Circuit Design, Inc.
29
OPERATION GUIDE
5. Extended command and extended response
Commands and responses for performing the extended functions.
Example Change the CH of the target station to 07
Source station side
Source
Station
EI=01
User
controller
*DT=05
@DT 05 @CH07 /C
①
Extended command
②
Extended response
Target station side
User
controller
④
Change the channel to 7(07h)ch
Target
Station
EI=04
Relay
Station
EI=02
Relay
Station
EI=03
⑥
Receive response
*DR=05 @CH07
⑤Return the
result of processing
③
Request to process
6. Receive response
When issuing the monitor command and extended command, processing is performed at the target station and the
result is returned to the source station. This processing result is output from the source station as a receive
response.
7. ACK response
When issuing the extended command and so on, an ‘ACK’ is returned to show that the target station received the
command. This ‘ACK’ is output from the source station as an ACK response.
8. Error response
A response returned if there are errors in the format of the transmit command, control command and so on.
