3
A. GENERAL INSTRUCTIONS
Instructions found herein cover disassembly, assembly and parts identification of C324AXFX-
250/12005 pump.
NOTE: Individual contracts may have specific provisions that vary from this manual. Should any
questions arise which may not be answered by these instructions, refer to General
Instructions Manual, SRM00046, provided with your order. For further detailed information
and technical assistance please refer to Imo Pump, Technical/Customer Service
Department, at (704) 289-6511.
This manual cannot possibly cover every situation connected with installation, operation, inspection, and
maintenance of equipment supplied. Every effort was made to prepare text of manual so that engineering
and design data is transformed into most easily understood wording. Imo Pump must assume personnel
assigned to operate and maintain supplied equipment and apply this instruction manual have sufficient
technical knowledge and are experienced to apply sound safety and operational practices which may not
be otherwise covered by this manual.
In applications where equipment furnished by Imo Pump is to become part of processing machinery, these
instructions should be thoroughly reviewed to ensure proper fit of said equipment into overall plant
operational procedures.
WARNING
If installation, operation, and maintenance instructions are not correctly and strictly
followed and observed, injury to personnel or serious damage to pump could result. Imo
Pump cannot accept responsibility for unsatisfactory performance or damage resulting
from failure to comply with instructions.
INTRODUCTION
This instruction manual covers the C324AXFX-250/12005 pump.
DESCRIPTION OF EQUIPMENT
C324AXFX-250/12005 pump is a positive displacement, rotary screw pump consisting of precision bored
housings that encloses a driven screw (power rotor) and two intermeshing following screws (idler rotors).
These screws when rotating form a succession of closures or cavities. As they rotate, fluid is moved axially
from inlet port to outlet port in a continuous, uniform flow with minimum fluid pulsation and pump noise.
Fluid flowing through pump provides lubrication to moving parts.
Summary of Contents for IMO C324AXFX-12005
Page 13: ...13...
