READ THIS ENTIRE PAGE BEFORE PROCEEDING
FOR THE SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO THE EQUIPMENT, THE
FOLLOWING NOMENCLATURE HAS BEEN USED IN THIS MANUAL:
DANGER
Failure to observe the precautions noted in this box can result in severe bodily
injury or loss of life.
WARNING
Failure to observe the precautions noted in this box can cause injury to personnel
by accidental contact with the equipment or liquids. Protection should be provided
by the user to prevent accidental contact.
CAUTION
ATTENTION
Failure to observe the precautions noted in this box can cause damage or failure
of the equipment.
Non compliance of safety
instructions identified by
the following symbol
could affect safety for
persons:
Safety instructions where
electrical safety is
involved are identified by:
Safety instructions which
shall be considered for
reasons of safe operation
of the pump and/or
protection of the pump
itself are marked by the
sign:
ATTENTION
CONTENTS
Safety and Table of Contents .......................................................................................................A
General Instructions..................................................................................................................... 1
Model Designation ........................................................................................................................ 1
Ordering Instructions..................................................................................................................... 1
Installation..................................................................................................................................... 2
Operation ...................................................................................................................................... 3
Inspection and Parts List............................................................................................................... 3
Maintenance - Disassembly Instructions....................................................................................... 4
Maintenance - Reassembly Instructions ....................................................................................... 4
Pump Assembly Drawing.............................................................................................................. 5
ATTENTION
If operation of this pump is critical to your business, we strongly
recommend you keep a spare pump or major repair kit in stock at all times.
As a minimum, a minor repair kit (o-rings, gaskets, shaft seal and bearings)
should be kept in stock so pump refurbishment after internal inspection can
be accomplished.
A
Summary of Contents for IMO 110
Page 7: ...Figure 4 5...
