GENERAL INSTRUCTIONS
NOTE:
Individual contracts may have specific provisions that vary from this manual. Should any
questions arise which may not be answered by these instructions, refer to General Instructions
Manual, CA-1, provided with your order. For further detailed information and technical
assistance please refer to Imo Pump, Technical Service Department at (704) 289-6511.
This manual cannot possibly cover every situation connected with installation, operation, inspection and
maintenance of equipment supplied. Every effort was made to prepare text of manual so that engineering
and design data is transformed into most easily understood wording. Imo Pump must assume personnel
assigned to operate and maintain supplied equipment and apply this instruction manual have sufficient
technical knowledge and are experienced to apply sound safety and operational practices which may not
be otherwise covered by this manual.
In applications where equipment furnished by Imo Pump is to be integrated with a process or other
machinery, these instructions should be thoroughly reviewed to determine proper integration of the
equipment into overall plant operational procedures.
This instruction manual covers the Series 110H and 210H Canned Motor Pumps. The model
numbers of a particular pump may be found on nameplate. Refer to Figures 1 and 4 and Tables 1
and 2 for instructional keys when using this manual.
Figure 1 – Model Designation
Figure 2 – Nameplate Data
Ordering Instructions
All correspondence pertaining to renewal parts for equipment must refer to instruction book and should be
addressed to the nearest Imo Pump representative or sales office.
Handling of renewal orders will be greatly facilitated if following directions are carefully observed:
1. Give number of instruction book.
2. Give serial number of machine for which part is desired. Number appears on nameplate
3. Give name and part number from parts list or assembly drawing
1
Summary of Contents for IMO 110
Page 7: ...Figure 4 5...
