Cirago NUS1000, User Manual

Page: 31 / 35

29
7. Usage Tips
1
Hardware
1.1
We do not recommend connecting two units of a 2.5” USB Storage device
subject to the limitation of the power adaptor and rating of the USB drives. You
may need to insert the auxiliary USB power cord supplied with your USB drive.
1.2
Do not unplug the USB storage when the storage LEDs are flashing. Push the
Eject button (for 1 sec at least) and wait until the USB LEDs are off. The more
efficient way to unplug connected USB devices is to use the “Unplug” command
in the Web Interface to select the individual USB port you wish to unplug.
1.3
Do not unplug the power. Use the “Shutdown” command in the web interface
and wait until all USB LEDs are off. Alternatively, you can use the “Eject” button
and unplug the power after all USB LED off.
2
Web Interface
2.1
Remember to add the “:1010” after the name or IP address of the NUS1000 to
enter the web interface. The default port 80 is reserved for the WebDAV server
access.
3
Naming of NUS box,
The server name of NUS box is broadcast by NetBios in PC environment, so that you
can connect to it by just using the server name NUS also support the Bonjour naming
service used by Apple devices, the box can be access by using the server name, such as
NUS1000.local They are more convenient than using the IP address.
4
File Sharing
4.1
In specific user authorization mode, if you want a directory to be accessible by
some users as read/write and other users as read only, create two folder names
pointing to the same directory and assign different groups of users with different
access rights.
4.2
The User list is stored in the device configuration, so it is saved when you save
the system configuration under “Configure Tools”.
4.3
Folder lists are associated with each drive, it only works with FAT32 disk not on
NTFS
5
iTunes Server
5.1
Though the default allows the scanning of all attached drives, it is recommended
to limit the scope of the media files scanning by specifying the directory
assignment.