10
4.2 How to Set and Change Specification of MODE1/MODE2
1) Make sure STOP button is pressed before set up, and pump is not working. Press MENU,
LED screen will display the current time (time will not count during set-up), use arrow buttons
to adjust the time. LEFT and RIGHT to move the cursor one digit, and UP and DOWN to
increase or decrease one digit.
(Remarks: 0:00-11:59 is one cycle). For example, the current time is 6:00 and AM light
is lit, when change the time after 11:59, the time change to 0:00, PM light will be lit.
2) After time set-up, press ENTER to save and exit.
Don't press ENTER if to continue change the specification of MODE1 and MODE 2.
Press MENU again, the light of MODE 1 and S1 will be lit, screen display 6:00, and
AM light is lit. Use arrow buttons to adjust the time. When the time is over 11:59, PM
light will be lit, AM light extinguished.
3) Press ENTER to save and exit after start time set-up. To continue and adjust the
running hour, press MENU, then use arrow buttons to increase and decrease running
hours. Each press is for 1 hour. Press ENTER to save and exit. Or press MENU to
adjust S2/S3/S4, the same adjustment method as S1.
4) Follow MODE 1's adjustment methods to adjust MODE 2.
5) Could not change speed using arrow buttons when running MODE1/MODE2. Can
only change the speed of MODE 1 and MODE 2 by pressing CLEAN/ECO/BOOST,
and then use arrow button UP and DOWN to change the RPM. When it is done, the
corresponding speed in MODE 1/MODE 2 will also change.
You could only change according to the matching quick start button. For example, in
MODE 1, S1 and S3 is CLEAN, S2 and S4 is ECO; in MODE 2, S1 and S3 is ECO, S2
and S4 is CLEAN.
5. How to Operate the Pump?
Totally three pre-programmed schedules: Regular Mode (including ECO; CLEAN; BOOST)
and MODE 1/MODE2.
1000-2400RPM
DEFAULT: 1500
CLEAN
2400-2850RPM
DEFAULT: 2400
2850-3450RPM
DEFAULT: 3250
ECO
BOOST
Indicator Light
