CipherLab RS31 Reference Manual Download

Page: 181 / 181

181

Appendix III

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative

Works thereof, You may choose to offer, and charge a fee for, acceptance of support,

warranty, indemnity, or other liability obligations and/or rights consistent with this License.

However, in accepting such obligations, You may act only on Your own behalf and on Your

sole responsibility, not on behalf of any other Contributor, and only if You agree to

indemnify, defend, and hold each Contributor harmless for any liability incurred by, or

claims asserted against, such Contributor by reason of your accepting any such warranty or

additional liability.

END OF TERMS AND CONDITIONS

Summary of Contents for RS31






















































































































































































Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands

CipherLab RS31, Reference Manual

Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands