CipherLab RS31 Reference Manual Download Page 91

Page: 91 / 181

Basic Operation

3.2.

STATUS BAR

The left side of the status bar shows notification icons, and the right side of the status bar

shows status icons.

3.2.1.

ICONS ON STATUS BAR

STATUS ICONS

Icon

Description

Bluetooth is on.

The device has been connected to a Bluetooth device.

The device is currently connected to a Wi-Fi network and performing data

transmission.

No mobile network signal

The device is currently connected to a 4G network. A symbol will be shown on

the left to indicate the cellular data connection type (e.g. 3G).

Full mobile network signal

Airplane mode is active, which means all radios are inactive now.

Alarm is active.

No SIM card is inserted

All sounds are silent except for alarms (Vibration mode).

The main battery is fully charged.

Status icons

Notification

Summary of Contents for RS31






















































































































































































Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands

CipherLab RS31, Reference Manual

Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands