CipherLab RS31 Reference Manual Download Page 109

Page: 109 / 181

109

Wireless Radios

4.1.1.

SHARE WWAN DATA

The WWAN connection on the mobile computer can be shared to other devices. You may

share internet connection with a computer or device through USB or Bluetooth tethering, or

share with a maximum of eight devices by turning the mobile computer into a Wi-Fi hotspot.

BLUETOOTH TETHERING

To share data connection through Bluetooth tethering:

Pair the mobile computer with the device of interest.

Tap All Apps

| Settings

| More

| Tethering & portable hotspot.

Tap Bluetooth tethering. The mobile computer will share its WWAN network with

Bluetooth-connected devices through Bluetooth sharing. Once the sharing is successful,
the icon will appear on the top left of the screen.

Summary of Contents for RS31






















































































































































































Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands

CipherLab RS31, Reference Manual

Search results

Summary of Contents for RS31

Reviews:

Related manuals for RS31

Brands by name

Popular brands