13
General
CPX Septic Tank 1200L
CPX Part No: 23012,
RSK: 5622358
The Septic Tank is rotationally moulded from impact-resistant and age-resistant polyethene
plastic and is intended for:
Greywater, (Bath, Dish and Wash)
The Septic Tank is only intended for use as septic tank.
The Septic Tank is equipped with two separate chambers. The second chamber has a built in
function equivalent to a T-pipe-function.
The design of the Septic Tank allow a long distance of sedimentation which gives the best
purification.
RISE (Research Institute of Sweden, former SP Statens Tekniska Forskningsinstitut) has
approved the strength calculation made according to EN-12566-1.
The Septic Tank is supplied with a rotationally moulded lid with child proof locking system.
The lid is
tested and approved by SP according to “Boverkets handbok om Barnsäkra
brunnar” and “SP metod 0487 genomtrampningsprov utgåva 3”.
The Septic Tank is also supplied with a pre mounted DN 110 outlet pipe.
Important
Before installation you must contact the environmental and health protection office in your
municipally to ensure the local regulations and to get permission for the installation.
Warranty
To make sure the sludge separation works as intended and the longevity of the Septic Tank
you need to follow and use these instructions. If the Septic Tank and it´s components are
subjected to negligent handling, installation and instructions not followed, then the
warranty is void.
Safety
The locking system of the lid shall always be operated with a 16 mm socket tool.
By safety reason the lid locks must always be closed when
the lid is placed on the tank!
Warning!
Never enter a Septic Tank
that is in use.
Risk of hazardous gases and drowning
could be fatal!
Summary of Contents for 23012
Page 25: ...25...