background image

R599864 - Assembly and Calbration User Manual

 

2

Changes

Cineversum provides this manual ‘as is’ without warranty of any kind, either expressed or implied, including but 

not limited to the implied warranties or merchantability and fitness for a particular purpose. Cineversum may 

make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any 

time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to 

the information in this publication; these changes are incorporated in new editions of this publication.

Copyright

All right reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be 

recorded, transmitted or stored in a retrieval system without the prior written consent of Cineversum.

Guarantee

Cineversum provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of 

guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during 

transport,  as  well  as  for  material  and  manufacturing  faults.  Cineversum  must  be  informed  immediately  in 

writing of any complaints. If the purchaser or third party caries out modifications or repairs on goods delivered 

by Cineversum, or if the goods are handle incorrectly, in particular if the systems are commissioned operated 

incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all 

guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system 

failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. 

Normal wear as well as normal maintenance are not subject to the guarantee provided by Cineversum either.

The environmental conditions as well as the servicing and maintenance regulations specified in this manual must 

be complied with by the customer.

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights 

of  their  respective  holders. All  brands  and  product  names  mentioned  in  this  manual  serve  as  comments  or 

examples and are not to be understood as advertising for the products of their manufactures.

Summary of Contents for Static Cinemascope Lens Kit













Reviews: