Lens ALignMent
R599864 - Assembly and Calbration User Manual
7
B
Release knob B to adjust the Anamorphic lens tilt.
Pincushion and barrel effects depend of the lens tilt.
You may obtain a residual pincushion effect at the screen when using a throw ratio between 1.5:1 and
1.8:1 or a projection distance shorter than 5 meters. It is recommended to install your projector at a
minimum distance of 5 meters from the screen and using 1.8:1 or higher throw ratio.
2.3
Adjusting the Anamorphic lens angle.
When the there is some skew to the picture, that means that the Anamorphic lens is angled slightly. To restore
the parallelism of the picture, you may release knob/bolt C and rotate the Anamorphic lens as describe below.
C
Adjust the Anamorphic lens angle to eliminate the visible skew.
Summary of Contents for Static Cinemascope Lens Kit
Page 11: ......
