Cineversum R599870, User Manual

Page: 30 / 44

R599870 - Force 4K User Manual
INSTALLATION
30
10.3 Pixel adjust
Adjust
Disables with the setting Off, to enable the pixel adjustment turn this setting to On.
Adjust Area
Whole: the entire screen is selected for adjustment.
Zone: the screen is divided into 121 adjustment zones.
Adjust Color
Select the color to adjust: Red or Blue. The green color is fixed.
Adjust Pattern
Enables a third party adjust pattern to be used for pixel alignment.
Adjust Pattern Color
Select a pattern to help the pixel alignment. Settings: White or Green+adjusting Color. Yellow for red, Cyan for
blue.
Adjust (Pixel)
This function is enable when the Adjust Area is set to Zone only. You can adjust the selected color position
horizontally and vertically by 1-pixel steps.
• H settings: -2 +2
• V settings: -2 +2.
Adjust (Fine)
Use this function to move the selected color within smaller steps.
• H settings: -31 +31
• V settings: -31 +31
Reset
Reset all pixel adjustments to default factory settings.
RCU SHORTCUTS DURING PIXEL ADJUSTMENT:
[GAMMA] button on the RCU switches adjust color parameter between Red and Blue.
[PIC. ADJ.] button on the RCU switches the adjust area parameter between whole and zone. At the same
time, the zone cursor will appear on the adjust pattern.
[COLOR SPACE] button on the RCU changes the adjust pattern from white to green+adjust color.
Use the [COLOR TEMP] button on the remote control to change adjustment method from Pixel to Fine
tune and switch to the fine tune window.
[BACK] button will exit the Pixel Adjust mode.
10.4 Anamorphic
• Off: No modification to original picture.
• Mode A: The picture is vertically stretched to fit an installation with anamorphic lens. A cinemascope picture
is stretched to completely fill the panels without black bands, using the optimum resolution and brightness.
2.35:1 source with lens Mode A with lens
Anamorphic Mode A.