Cineversum Black Wing One, User Manual

Page: 35 / 40

9.0 MISCELLANEOUS
R599763 - Blackwing One User Manual 35
9.0 MISCELLANEOUS
9.1 RS-232 input
Communication Specifications
Control of this unit is possible using a computer or automation device connected with a RS-232 straight cable (male
- female D-sub 9 pins cable). Communication specifications for this unit are as follows:
Command Format
When sending a command to this unit, use the following data format:
Available Lengths and Commands
Baud Rate 115200 bps
Data Format Binary
Character Length 8 bits
Parity None
Stop Bit 1 bit
X on/off None
Flow Control None
Header Length Command EoD
1 or 3 bytes 0 or 1 byte at least 1 byte 1 byte
Header (00h) for power ON command, (77h 88h 99h) for other commands.
Length The total bytes of “Length” and “Command”
Command Designates the command
EoD Designates the end of the data. Fixed to (FFh)
Command Header
(00h)
Length Command Description
Power ON None 01h If the projector is in standby mode, this command
switch the unit ON.
Command Header
(77h 88h 99h)
Length Command Description
Power OFF
03h 02h 01hh If the projector is powered ON, this command
switch this unit into Standby Mode. (Directly OFF)
Switch Input 03h 02h 02h Switch active input to Video (Composite)
02h 03h Switch active input to S-Video
02h 04h Switch active input to Component
02h 05h Switch active input to VGA (sD15)
02h 06h Switch active input to HDMI 1
02h 07h Switch active input to HDMI 2
Blanking 03h 02h 08h Toggle projector Blanking ON
02h 09h Toggle projector Blanking OFF