Cineversum Black Wing One, User Manual

Page: 31 / 40

7.0 THEATRE MODE
R599763 - Blackwing One User Manual 31
To switch forth and backward, press twice the [ASPECT] button on the RCU as described below.
7.4 2.35 THEATER Slider (Ref. T9004000)
Plug the RF-Emitter to the Trigger 2 output of the projector
Connect the RF-Emitter provided with the 2.35 THEATER Slider
to the 12V Trigger 2 output
Configure Initial Setup Menu
⇒ ⇒
⇒ ⇒
Trigger 2 to “THEATRE”
The “Initial Setup
⇒ ⇒ ⇒ ⇒
Trigger 2” menu determines the Trigger 2 output located in the panel input of the Blackwing One
this is a global parameter (for all inputs):
• ON: the 12V Trigger 2 is always active when the projector is switched ON.
• OFF: the 12V Trigger 2 is always switched Off.
• THEATRE: this option gives to the projector the full control of the Trigger 2 output levels to control the
Anamorphic Lens position in regard to the selected input and selected aspect ratio.
Cinemascope input: Aspect Ratio to “Cinemascope”
When selecting a widescreen input (2.35:1, 2.37:1 or 2.40:1), the original aspect ratio of the source is larger than
16:9, you can see black bars on the top and the bottom of the screen.
• Select Cinemascope for this input in the menu “Input Signal
⇒ ⇒ ⇒ ⇒
Aspect Ratio
⇒ ⇒ ⇒ ⇒
Cinemascope”.
• Then choose the correct Cinemascope Aspect Ratio in the menu ”Input Signal
⇒ ⇒ ⇒ ⇒
Cinemascope Aspect Ratio
⇒ ⇒ ⇒ ⇒
2.37” so that the black bars disappear and the active picture fulfills the height of the screen.
The Anamorphic Lens is automatically placed in front of the projector to restore the correct picture aspect ratio.
Full Screen
Converted 16:9
Cinemascope
... press twice [ASPECT] button on the Remote Control Unit
When the source automatically switches format...
on 2.35 screen
16:9 format
2.35:1 format
RF-EMITTER
12V Trigger 1
12V Trigger 2