4.0 GETTING STARTED
R599763 - Blackwing One User Manual
17
4.3
Operating LEDs
Operating LED
Description
Status
green LED
Power
red LED
Temp
yellow LED
Fan
yellow LED
Off
On
Off
Off
Unit is in standby mode
On
Off
Off
Off
Unit is in operate mode (during projection)
Blinking
Off
Off
Off
Unit is in CooL Down* mode or Starting mode
Off
Blinking
Off
Blinking
An error occurred during operation, at least one
fan is locked.
Off
Blinking
Blinking
Off
The projector cannot start because an over
temperature has been detected.
Off
Blinking
Blinking
Blinking
The lamp failed, replace the lamp.
A
BOUT
C
OOL
D
OWN
MODE
After projection or when warning occurred, the heated lamp will go through a 2 minutes cool-down process known
as the Cool Down mode. This function is to prevent damage and deformation from the heated lamp may cause to
the internal components of the projector. It also prevents lamp breakage and shortened lamp life.
The Cool Down mode is indicated by the blinking Status green LED. When in Cool Down mode, the projector cannot
be turned ON.
After the Cool Down process is completed, the unit will automatically switch to the Standby mode.
C
AUTION
When in Cool Down mode, do not pull out the plug from the outlet. Also, do not block the air inlets/exhaust vents by
standing the projector on its end or laying it on its side.
STATUS
TEMP
FAN
(green LED)
(yellow LED)
(yellow LED)
POWER
(red LED)
