manualshive.com logo in svg

Cineversum Black Wing MK 20II, User Manual

Share
Download
Cineversum Black Wing MK 20II User Manual Download Page 8

2.0  INSTALLATION GUIDELINES

8

R599800 - Blackwing mk2011 User Manual

2.0 INSTALLATION GUIDELINES

2.1

About 3D Content and 3D Projection

This unit is compatible with 3D playback. The source can be connected using one of the two available HDMI 1.4a
inputs. The 3D effect is based on the binocular parallax which is the difference of the view on a single object when
seen from the left and right eyes, respectively.

Binocular parallax

3D movies use two sets of images: one set for the left eye, the other set for the right eye. These images can be
stored into three compatible formats: Frame packing, Top-&-Bottom or Side-by-Side.
The 3D scheme of this unit decodes the source and converts it into a frame sequential format for 3D projection,
alternating the images produced for the left and right eye.

Compatible source formats and Projection format

This unit is compatible with the following 3D formats:

•

1080p @ 23.98/24Hz - Frame Packing (Blu-ray movies)

•

720p @ 50 or 59.94/60Hz - Frame Packing (gaming)

•

720p @ 50 or 59.94/60Hz - Top-Bottom

•

1080p @ 23.97/24hz - Top-Bottom 

•

1080i@ 50 or 59.94/60Hz - Side-by-Side

The left and right images are produced alternatively. Therefore, the shutter glasses are used to separate the left eye
images which will be only visible to the left eye, and the right eye images only visible to the right eye. The human
brain then perceives stereo objects based on the visual differences between two images of the same object but
taken from different angles.

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

R

Frame packing

Top and Bottom

Side by Side

Storing Formats

Projection Format

Summary of Contents for Black Wing MK 20II

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands