manualshive.com logo in svg

Cineversum Black Wing MK 20II, User Manual

Share
Download
Cineversum Black Wing MK 20II User Manual Download Page 36

6.0  MENU AND PICTURE SETTING

36

R599800 - Blackwing mk2011 User Manual

Black Level

Sets the black level when used indoors from 0 to 10.

6.5

Display Setup Menu

Back Color

Configures the screen color displayed when there is no active input. Set to Blue or Black.

Menu Position

Upper left, Upper right, Center, Lower right, Lower left.

Menu Display

15sec: Display menu for 15 seconds before fade out.
On: Always display menu.

Line Display

5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display.

Source Display

On: Display the source of the input signals after input selection.
Off: Don’t display.

Logo

On: Display logo during startup for 5 seconds.
Off: Don’t display.

Language

Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norvegian, Russian and Chinese.

6.6

Function Menu

Trigger

The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:

•

Off: 12V trigger voltage state is always low.

•

On (Power):12V trigger state is high when the projector is powered ON.

•

On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with
anamorphic kits or motorized screens.

Off-Timer

You can configure this automatic power Off function that will switch off the projector when there is no operation or
after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.

High Altitude Mode

Select this when the projector is in a location of low atmospheric pressure. On or Off.

Communication Terminal (BW2 & 3)

Sets on which input is connected the control device. It is not possible to use it at the same time both RS-232C and
LAN inputs. Settings: RS-232C, LAN.

Network (BW2 & 3)

When the Communication Terminal selected is LAN, this unit will be visible on the local Network and the following
parameters need to be configured. See “LAN protocole (BW2 & 3)”,  page 49 for more details.

Lamp Reset

Resets the lamp use time to "0" during the lamp replacement procedure. See “Replacing the Lamp”,  page 41 for
more details.

Summary of Contents for Black Wing MK 20II

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands