Ciel EaM Batz 2.0, Manual

Page: 4 / 9

Functions of the detector:
A Microphone – The electret microphone is very sensitive to ultrasonic
calls, it is mechanically robust and water resistant but not waterproof. To
prevent the microphone from being damaged avoid direct contact to water
or any other fluids.
B Display – The frequency you have chosen will be displayed on the LED
display. This will assisit you if you are looking for specific species or if you
want to classify unknown calls. The display is dimmed to a low brightness
to provide good readability at dawn and at night without overexerting your
eyes.
C Loudspeaker – For a clear reproduction of the bat calls two 0.5 watt
microspeakers are integrated in the detector.
D On/Off switch – Switch to turn your detector on and off.
E Recording button – To start recording and playback and erase the
detector's call memory.
F Volume - +/- Push button to set the volume to the level required.
G Thumbwheel – To set the frequency of the HD detector.
H Strap – To protect your detector from falling.
Rear side – battery compartment – Please take care of the polarity of
the battery. If the device is not used for a long period of time please
remove the battery frrom the compartment.