21798-01-EN Rev. 04
Page 21
Figure 17: Telematics Module label with serial number
Connect the cellular antenna cable connectors to the proper terminals on the
outside of the telematics module as shown in Table 1, and torque to 7-10 in-lb
(0.8-1.1 N-m). Mount the antenna high inside the truck cab away from any metal
frames.
Telematics
Module
Terminal
Antenna Cable
Description
CELL M
LTE 1
MIMO 1
LTE 1
Main cell antenna
CELL D
LTE 2
MIMO 2
LTE 2
Diversity cell antenna
GNSS
GPS
GPS
Global Positioning System
Table 2: Telematics Module antenna connections
CAUTION
The external antenna(s) used for the radio module must provide
a separation distance of at least 25 cm [10”] from all persons and
must not be co-located or operating in conjunction with any
other antenna or transmitter except in accordance with FCC’s
multi-transmitter policy.
Summary of Contents for SMART HATCH
