21798-01-EN Rev. 04
Page 30
During normal operation, when conditions meet the requirements of Section 5.2,
the following information will be displayed to the driver (Figure 25):
•
Air Content (% by volume)
•
Concrete temperature (
°
F or
°
C)
•
Drum speed (RPM) and direction (positive rpm is charge direction;
negative rpm is discharge direction)
•
Battery charge level (% remaining)
•
Hydraulic Pressure if optionally equipped.
If conditions do not meet the requirements of Section 5.2, the display will show
the following (Figure 26):
•
Number of drum revolutions remaining to complete SMART
hatch
sensor initialization and begin air content measurement
•
Drum speed and direction
•
Battery charge level
•
Hydraulic Pressure if optionally equipped.
Figure 25: In-Cab Display (Measuring)
Figure 26: In-Cab Display (SMARThatch Sensor Initialization)
Summary of Contents for SMART HATCH
