CID XBC173060, Owner'S Manual

Page: 33 / 52

X-treme Duty Piston Motor Brush Cutter
January 2021
33
Maintenance procedures for the drive bearing housing require special
tools and skills. DO NOT attempt to service the drive bearing housing
unless you have the tools and skills to do so. Take your brush cutter to
your local dealer to have the drive bearing housing serviced.
4.8 Drive Bearing Housing Maintenance
1. The oil level in the drive bearing housing must be checked
weekly. Refill with 85W-140 5EP grade gear oil only.
2. CHECK the oil level by removing the oil filler plug and oil breather
plug. The oil level should be at the bottom of the breather plug.
The initial oil should be changed after 50 hours of operation under load.
Subsequent oil changes should take place after every 1000 hours of
operation.
Checking Fluid Level
Oil Breather Plug
Oil Filler Plug