CID XBC173060, Owner'S Manual

Page: 18 / 52

X-treme Duty Piston Motor Brush Cutter
January 2021
18
5. Connect the attachment hydraulic hoses and the case drain hose to the
auxiliary supply couplers located on your skid steer loader lift arm.
6. Attach the safety chain to a secure place on the skid steer unit to limit the
height that the cutter can be raised.
DO NOT operate this machine if you (the operator) can see the cutter
blade from the sittiing position. If the operator can see the cutter blade,
the back of the cutter is raised TOO HIGH, lower ther cutter deck to avoid
debris from being thrown at the operator.
3.2 Connecting Brush Cutter Cont.
Check that hydraulic hoses are locked into the skid steer couplers before
starting the cutter.
To keep contaminants from entering the hydraulic system; wipe off any
dirt or dust from the male or female hydraulic flat face couplers with a
clean rag before attaching hoses.
4. Activate your skid steer’s lever lock switch to lock the pins into the flange
slots of the brush cutter’s attachment plate. If your skid steer does not have
this switch, manually lock the levers as shown in
Figure 3.2c below.
ATTACHMENT FLANGE
Ensure lock pins fully extend into
the attachment flange slots.
Coupler Levers Locked
Figure 3.2c Quick Attach Mechanism Locked to Attachment Plate