Construction Implements Depot
PAGE 11
Trencher
September 2017
After every use, clean off any dirt residue
with a garden hose and repeat grease
application.
Every Week
Inspect the trencher teeth and replace
any worn or broken teeth.
After Every Season
Inspect the implement for any loose or
worn parts that may need to be replaced
prior to the next season.
Clean, sand & repaint any area that looks
worn or scratched to prevent further
rusting. Use an equipment-paint found at
your local hardware store or building
center.
Lubricate all pivot joints. If located in an
area near an ocean or other corrosive
conditions, apply a thin layer
of grease to any exposed cylinder rod
surfaces. Wipe grease from cylinder rods
with a clean rag when taking the
attachment out of storage.
Store your implement in a shed or cover
with a water-proof tarp to protect it from
the weather. Store in an area not
frequented by children.
Specifications
XT
RE
N
CH
36
XT
RE
N
CH
48
XT
RE
N
CH
36
XT
RE
N
CH
48
GPM(L)
15-
20
(57-
76)
15-
20
(57-
76)
20-
30
(76-
114)
20-
30
(76-
114)
Width
48” (1219mm)
Height
24” (610mm)
Length
90”
(228
6
mm)
90”
(2286
mm)
Weight
(no
chain)
Weight
Cupped
Teeth
Weight
Combo
Teeth
Weight
Rock &
Frost
Teeth
