33
The following information appears on the display:
- training times within the limit
values set for the heart rate
- training times above the upper
limit values set for the heart rate
- training times below the lower limit
values set for the heart rate.
- average heart rate (Av) (changes
every 2 seconds)
- maximum heart rate (MA)
The stored values may be cancelled
in the stopwatch mode (ref.
subsection 5.2).
5.5 Graphics display
The
CICLOPULS CP 16is
also offer the possibility to
obtain a graphics display of the exertion within the set
heart rate zone in the central part of the display.
The blue segments turn black (from left to right) with a
heart beat within the heart rate zone. The number of black
segments depends on the current heart rate. If all the blue
segments have turned black, the heart rate measured is
higher than the upper limit.
If the heart rate measured is below the lower limit, only the
first two segments will turn black.
5.6 switching beep sound on/off
The
CICLOPULS CP 16is
heart rate monitor is fitted with
an optical alarm signal:
CP16iS_engl.indd 13
10.04.12 14:22
