CIAT DESTRATIFIER TPL 4000, Instruction Manual

Page: 9 / 24

6 - SETUP
6.1 - H4000 Heliotherme
To ensure correct air diffusion and to comply with the EN 294
standard relating to safety zones, you are recommended to
position HELIOTHERME units at a height of:
-
Between 2.5 and 4.5 metres when wall-mounted
-
Between 4.5 and 10 metres when ceiling-mounted.
If the fan motor assembly is removed, also ensure that the rear
of the unit is a sufficient distance from the wall to allow access:
Min: 0.15 m
Min: 0.15 m
Min: 2.5 m Max: 4.5 m
Min: 4.5 m Max: 10 m
6.2 - TPL4000 Destratifier
To ensure correct air diffusion and to comply with the EN 294
standard relating to safety zones, you are recommended to
position DESTRATIFIERS at a height of:
-
Between 5 and 15 metres.
The rear of the unit must be at least 145 mm from the wall to
facilitate removal of the fan motor assembly when necessary.
Min: 0.145 m
Min: 5 m Max: 15 m
6.3 - Wall-mounted H4000 Heliotherme
Installation using wall-mounting support kit
Installation mainly for HEATING purposes
Y X
2
1
Installation using low wall-mounting support kit
Installation mainly for COOLING or REVERSIBLE purposes
X Y
3 1
2
Size H4300 H4350 H4400 H4450 H4500 H4630 H4630S

Filter box wall bracket

Wall bracket (Code 7181226)

Drain sleeve in cooling mode, outer diameter 32
X mm 310 260
Y mm 390 340
Distance to allow between the wall bracket legs for HELIOTHERME mounting
Dimensions mm 512 558 610 710 808 943 943
EN-9 H4000 HELIOTHERME