CIAT COADIS LINE 600, Instruction Manual

Page: 16 / 32

3 - DESCRIPTION OF THE UNIT (FIG. 1)
The COADIS LINE™ (CDL) unit that you have just purchased is part of a range of comfort units designed for
integration into a suspended ceiling. It is used for heating, cooling, dehumidification and air filtration. It includes a
coil with one or two hot water or cold water supply circuits and may include an electrical heater for heating.
a - Heat exchange coil
b - Fan motor assembly
c - Electrics box
d - Main condensate drain pan
e - Auxiliary condensate drain pan f - Condensate drain
g - Support brackets
h - Air filter
j - Air return/discharge panel
k - Fresh air inlet
3.1 - Data plate (Fig. 2)
1 - Code
2 - Serial number
3 - Description of the unit
4 - Rated motor output
5 - Motor rotation speed
6 - Coil type
7 - Wiring diagram reference
8 - Motor speed wiring
9 - Maximum service pressure
10 - Electric heater specifications (if fitted).
11 - EC declaration number
The data plate contains all the information required to identify the unit and its configuration. This plate is positioned
on the technical face containing all the connections, above the fresh air inlet.
Before contacting us, please note the serial no. and the designation.
This device may be used by children aged eight and over, and by persons with limited physical,
sensory or mental capabilities, or by persons with insufficient experience or knowledge, provided
that they are being correctly supervised or provided they have received instructions on how to
use the device in complete safety, ensuring that they have a full understanding of any risks
involved. Children must not be allowed to play with the device. User cleaning and maintenance
must not be performed by children.
During normal use, this device is intended to operate under the following site conditions:
■ Maximum altitude: 2000 m,
■ Minimum and maximum storage temperatures; -20°C + 65°C,
■ Minimum and maximum operating temperatures; 0°C +40°C,
■ Indoor return air maximum humidity level: 27°C DB (dry bulb) at 65% RH (relative humidity),
■ Clean interior environment (no oxidizing agents present).
The device requires protection from any form of impact during use. Protection rating IP 20 IK02.
This device is designed to operate in an over-voltage category II and pollution degree 2 environment, in accordance
with IEC standard 664-1.
To ensure a pollution degree 2 environment, the device must be protected from water and oil splashes, and the
dust allowed to settle on it must be limited.
COADIS LINE
TM
600 EN-16