CIAT CIATControl OPC Server, Installation And Operating Instructions Manual

Page: 22 / 32

NA 12.46 A
©2012 CIAT
NA 12.46 A installation instructions [22]
V05.2012
118 AlarmText Text description of current alarm Text description of alarm Read-only
119 InfoEnergyDemandAC
Cold water demand from master to slave by positioning of
actuators
values of 0 to 255% Read-only
120 InfoEnergyDemandAH
Hot water demand from master to slave by positioning of
actuators
values of 0 to 255% Read-only
121 InfoEnergyDemandAir
Fresh air demand from master to slave by positioning of
actuators
0 or 100% Read-only
122 ActPosSetpHeatStageA
Heating valve control from master to slave by positioning of
actuators
Values of 0 to 100% Read-only
123 ActPosSetpHeatStageB
Electric heater control from master to slave by positioning of
actuators
Values of 0 to 100% Read-only
124 ActPosSetpCoolStageA
Air conditioning valve control from master to slave by positioning
of actuators
Values of 0 to 100% Read-only
125 FanSpeedSetp
Ventilation control from master to slave by positioning of
actuators
Values of 0 to 100% Read-only
126 ActPosSetpFreshAir Fresh air control from master to slave by positioning of actuators 0 or 100% Read-only
127 InfoEnableHeat
Enable heating from master to slave by enabling heating/cooling
mode
0 = Disabled/1= Enabled Read-only
128 InfoEnableCool
Enable air conditioning from master to slave by enabling
heating/cooling mode
0 = Disabled/1= Enabled Read-only
HMI
129 TempRoom CIAT terminal ambient temperature Temp. value in °C Read-only
130 TempRoomSetpUserOffset Comfort setpoint override via CIAT terminal Temperature shift value in K Read-only
131 ComfortPushButton On/Off control via CIAT terminal
0 = Reduced (Stdby/Eco/Frost
protection)/1=Comfort
Read-only
132 FanSpeedUser Manual speed selected via CIAT terminal
Values of 0 to 100% LS 33% MS 66% GS
100%
Read-only
133 FanManual Auto/Man. speed selection on CIAT terminal 0=Auto/1=Man. Read-only